ETP 101 Dragonfly Output Test

Revision for “ETP 101 Dragonfly Output Test” created on November 20, 2015 @ 20:55:30

Title
ETP 101 Dragonfly Output Test
Content
<h6>1. PURPOSE / DESCRIPTION</h6> 1.1 Vary amplitude and motor driver input to map the output of current, RPM and propulsion. <h6>2. PROCEDURE</h6> 2.1 Assemble fully functional dragonfly with a MARC board onto test fixture 2.2 Set voltage to 7.4V 2.3 Connect Eagletree data acquisition system to the Dragonfly 2.4 Using the Dragonfly flight control software and Aardvark host adapter perform the following 2.4.1 Trim the wings so the amplitude is zero or very near zero 2.4.2 Set throttle to 20 2.4.2.1 Set all four servos to 20 2.4.2.1.1 Record motor RPM, Amp draw and thrust generated 2.4.2.2 Increase throttle to 40 and repeat 2.4.2.1.1 2.4.2.3 Increase throttle to 60 and repeat 2.4.2.1.1 2.4.2.4 Increase throttle to 80 and repeat 2.4.2.1.1 2.4.3 Set throttle to 20 2.4.4 Set all four servos to 0 2.4.5 Record any change to the zero amplitude of the wings <hr /> &nbsp; <h6>ENGINEERING TEST RESULTS</h6> <a href="http://wiki.techject.com/wp-content/uploads/2015/11/ETP-101-Dragonfly-Output-Test.xlsx">ETP-101 Dragonfly Output Test</a>
Excerpt


OldNewDate CreatedAuthorActions
November 20, 2015 @ 20:55:30 wanchen